מכונת תיוג מכסת ROPP אוטומטית למילוי שמן זית קו ייצור שמן

תיאור

automatic olive filling capping labeling production line constitutes the automatic inline olive filler machine with 4 filling nozzles,ROPP capping machine with automatic caps falling system as well as double sides labeling machine.Below are the basic data of the machines one by one

1.NPACK-5030 Automatic inline olive filling machine with four heads

The 4heads olive filling machine,controlled by the microcomputer,combines the photoelectricity with pneumatic operation,thus widely is applied for the liquid filling of the agriculture chemical、solution、liquid detergent、cosmetic as well as olive.The filling volume is precise,foamless and stable.The machine can fill the liquid with the range from 25-1000ml,meanwhile there is no special requirement on the shapes of bottles.That is to say,it can fill the liquid for the normal bottles as well as the irrugula-shaped bottles.
Model YX-5030
טווח מילוי 50 ～ 3000 מ"ל
מהירות מילוי: 20-30b / m （לנוזל 500-1000 מ"ל
דיוק ± 1%
כוח / ספק כוח 0.8 קילוואט 、 220 וולט
לחץ עבודה 5 ～ 6 kg / cm3
צריכת אוויר 0.5-0.7mpa
NW 500 ק"ג
ממד חיצוני 2000 × 800 × 1900 מ"מ
סימן: ניתן לתכנן ולייצר את חרירי המילוי על פי דרישות הלקוחות על טווח המילוי ומהירות המילוי

2.NPACK-C250 Automatic ROPP capping machine for olive bottle

The capping machine is a suitable equipment for roll-press-sealing the Aluminum caps for the plastic bottle、pet bottle、as well as glass bottle.It precesses the screw-press capping for the bottle under the rolling press from hobs,automatically feeding bottle、caps,removing the reverse caps .The capped bottle favors the characteristics like the stable capping effect,convenient uncapping,so that it function as conterfeit and anti-theft

Supply powder (V/Hz) AC 220/50 380/60
Capacity (m/min) ≧4000B/M
Cap size (mm) 250-1000
Application Alum-caps
Air exhaust from Vacuum pum (m3/h) 5KG
Outer dimention（L×W×H）(mm) 2000×1000×2300
N.G (kg) 800

3.Double sides labeling machine Model:NPACK-750A

The labeling equipment is for the round bottle labeling in the industry like food、oil、pharma、wine、cosmetics and so on.The machine with elegant design can be easily operated and maintained by the common worker,who requires no special training in operation this machine.Just give a simple adjustment to produce another product when you want to swap the different kinds bottle labeling.
The youtube video site about the operation of labeling machine .click the link

The bottle labeler is thus out from as belwo-mentioned characteristics:
1:The main body of equipment is made of SUS304 and advanced Aluminum products.
2:The labeling heads is drived by the stepping motor that is imported from Japan.
3:All the light sensor equipment is imported from both Japan and Germany
4:PLC Controlled by the human-machine interface with 60 memory units
5:The machine is the best choice for single worker’s operating.
6:The machine has the function as bottle-uprighting,bottle-distributing、labeling、flating as well as counting.
7:The position、height、angle of labeling can be adjusted easily.
8:Equipped with the conveyor belt,the machine is applied to set of the production line.
Supply power (V/Hz) AC 220/50 110/60
Power (W) 1500
Labeling precision (mm) ±1.0
Labeling size (mm) Height 15-100mm Length 20～300mm
Bottle size (mm) Outer Diameter 12-100mm Height 30-200mm
Capacity (b/m) 40-120
Dimension（L×W×H）(mm) 2200×1400×1550
N.W(kg) 320

Payment term: T/T 50%deposit, the balance paid before delivery.
Package: Each machine wrapped by PO film, then packed to standard wooden case.
Delivery time: Within 20 days after received your deposit.
This machine shall enjoy 1 year warranty and life-long maintenance service (Remark: Customer should use the consumption material appointed by us, or the failure of machine hereby induced shall not be in the warranty range)

Installation: after the machine arrive your factory,if you need,our technician will go to your place to install and test the machine and also training your worker to operating the machine (The time of train depend on you worker). The expenses (air ticket ,food , hotel,the travelling fee on your country) should be on your account and you need paid for the technician USD50 per day. also you can go to our factory to do training.
After service: If you get the problem on the machine ,our technician will go to your place to fixed the machine as soon as possible. The cost should be in your account.(as above).